  Plating on the edges by depth controlled level .
 Working schema.
Main characteristics of the plating.
Accuracy : - 0 + 2 mm
Strip width : > 3 mm
Plating 2D or 3D parts is possible.
Strip only on the edges of the band.
Examples.
Gold plated edges
 
Plating strips or edges by taping.
Working schema.
Main characteristics of the deposit.
Accuracy : ± 0.2 mm.
Width of a strip: > 1.5 mm
This system is more efficient for 2D parts when the parts are strong enough to support the taping operation.
Several strips on the two sides are possible.
Example.
Gold strip on one side
Plating strips or edges with a wheel masking system.
Working schema.
Main characteristics of the deposit.
Accuracy : - 0 + 1 mm.
Strip width : > 3 mm
This system is more efficient for 2D parts when the parts are strong enough to support the deformation on the wheel sytem.
Plating with a strip on one side or a strip on each side.
Examples.
Gold strip on one side
Spot plating with or without tools.
 This new process does not use specific tools for each customer part. Therefore, it is really adapted to prototypes and small or medium series of parts, in particular if the parts are plated with precious metals . For more details, please consul the technical specification of the process.
Main characteristic of the deposit.
Accuracy of the plating: ± 0.1 mm.
Minimum surface of the plating : > 0.250 mm2
2D or 3D parts.
Several spot on each sides.
Examples.
Gold spots
|
